Toyota Fresh Key Door Lock Reset How To Sequence Remote Alarm

To be precise, it seems to be “transmitter registration”.

First, the vehicle is put into the following state.

① The key is not inserted in the ignition key cylinder.
② Keep only the driver’s door open.
③ Put all doors in the UNLOCK state.

Insert the key into the ignition key cylinder and then remove it.

Do LOCK ⇔ UNLOCK 5 times with the door control switch.

Close and open the driver’s door once.

Then, again using the door control switch, perform LOCK ⇔ UNLOCK 5 times.

Insert the key into the ignition key cylinder, turn ON and LOCK once, and remove the key.

Then, the vehicle automatically performs LOCK ⇔ UNLOCK.

Press the keyless switch for 3 seconds or longer, release it, and then press the keyless switch again within 3 seconds.

If registered normally, LOCK ⇔ UNLOCK operation will be performed automatically once.

If it is done twice, it is a failure　

Finally, to complete the registration mode,
close the door of the driver’s seat and insert the key into the ignition key cylinder to finish.

Originally from \(^o^)/Owter